filename: tfs 1538.doc version 1.1 02.11.2011 vectron international filter specification tfs 1538 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 50 output: 50 remark: the maximum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fixed at 1538,5 mhz without any tolerance or li mit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss a e 2,9 db max. 3,5 db nominal frequency f n 1538,5 mhz passband pb f n 20,5 mhz pass band variation 0,7 db 1,5 db absolute attenuation a abs 1200 mhz ? 1450 mhz - min. 30 db 1626 mhz ? 1675 mhz - min. 30 db group delay ripple within pb p-p 6 ns max. 100 ns return loss within pb 10,5 db min. 9 db input power level max. 10 dbm operating temperature range otr - 40 c ... + 85c storage temperature range - 40 c ... + 85c temperature coefficient of frequency tc f * -73 ppm/k *) ? f c (hz) = tc f (ppm/k) x (t - t o ) x f cat (mhz) generated: checked / approved:
filename: tfs 1538.doc version 1.1 02.11.2011 vectron international filter specification tfs 1538 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 4 5 6 1,2 max. 0,6 0,75 3 ,0 +/-0,15 0,6 0,30x0,30 1 3 6 4 date code 50 test circuit l1 saw l2 2 5 1, 3, 4, 6 g38 b45 1 ground 2 input 3 ground 4 ground 5 output 6 ground date code: year + week b 2011 c 2012 d 2013 ... 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 frequency in mhz 1450 1500 1550 1600 1650 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 m a g n itu d e in d b 1450 1500 1550 1600 1650 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency in mhz v s w r
filename: tfs 1538.doc version 1.1 02.11.2011 vectron international filter specification tfs 1538 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plan, 3 pl ans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 1 0 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618 /eg) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,3 0,1 reel (all dimensions in mm) a : 180 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 60 c : 13,0 0,2
filename: tfs 1538.doc version 1.1 02.11.2011 vectron international filter specification tfs 1538 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260 c 217 c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1538.doc version 1.1 02.11.2011 vectron international filter specification tfs 1538 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification s.springfeldt 20.10.2011 1.1 - generation of filter specification s.springfeldt 02.11.2011
|
